Home page
Memory Testers
RAMCHECK LX DDR3/2

RAMCHECK LX DDR3
RAMCHECK LX DDR2

RAMCHECK LX DDR1

RAMCHECK LX Base Tester
Tech Support
Introduction
Manuals
Software Downloads
FAQ

Calibration & Upgrades
RAMCHECK Upgrade to       RAMCHECK LX
Application Notes
Development Logs
Service & RMA Policy

News Releases
Links
Site Map

Home


Contact us at
(281) 879-6226

sales@innoventions.com
RAMCHECK DDR Key Features RAMCHECK memory tester for checking SDRAM, DDR, SIMM, PC150, PC133, PC100 and other memory devices.
  • Tests and identifies 184-pin PC333/266/200 DDR, 4GB+
  • Supports all Registered, Unbuffered, ECC and non-ECC Parity DIMMs
  • Reliable and ultra low-cost, simple to operate
  • Rugged test socket
  • SPD Wizard for programming, editing saving SPD files
  • Fast - tests a 512MB DIMM in 11 seconds (Basic test)
  • Standalone or connect to a PC to print and log test results
  • Large backlit LCD
  • Free firmware upgrades available online
  • Optional converter for 200-pin DDR SODIMMs
  • Adapter may be factory-converted to the RAMCHECK DDR Pro level at a later date.
RAMCHECK DDR Specifications
Basic Test
  • Identifies module type, size, configuration, voltage and frequency
  • Checks open/short, addressing and identifies defective bits
Extensive Test
  • Voltage Cycling
  • Voltage Bounce
  • March Up/Down
  • Relative Refresh/Cell Leakage
  • Relative Voltage Spikes
  • Temperature Stress Test
Auto-Loop Test
  • Module is endlessly tested with different pattern bits
  • Detects pattern sensitivity problems
  • Excellent for burn-in procedure
Addressing Capability
  • Maximum 16 Row/ 16 Columns for a maximum 4G addresses. Currently, 2GB modules can be tested. Test support is added as larger modules are introduced to the market.
Clock Frequency
  • 333 MHz, 266MHz, 200MHz.
Data Bus Width
  • x64 to x72 bits (Parity/ECC)
Timing Resolution
  • 0.25nS to 0.5nS
Programmable Parameters
  • Size
  • Timing
  • Voltage
  • Patterns
  • Refresh
  • Mode
SPD Programming
  • Edit/program/save SPD data, unlimited SPD files
  • Production Mode for automated SPD programming
  • Convenient SPD Wizard
Error Display
  • 128 x 32 pixel LCD (reflective) with LED backlighting and 6 o'clock view direction, red/green LED indicators, status tones.
Upgrades
  • Free firmware and PC software upgrades via the Internet
  • Optional converter for 200-pin DDR SO-DIMM modules
Test Socket
  • Yamaichi test quality 184-pin socket, with rugged latches for easy insertion and removal of the modules.
Operating Temp/Humidity
  • 3C to 32C (40 F to 90 degrees F), 20% - 80% non-condensing
Power Requirement
  • 100-250VAC/47-63Hz. A Universal Switching Power Supply for 7V/4Amp is included.
Dimension/Weight
  • 9.5" x 6.5" x 3.5" (W x L x H)/4 lbs (11 lbs shipping weight)
Carrying Case
  • Included
Serial Cable
Warranty
  • 1-year limited warranty
Product operation and specifications are subject to change without prior notice.
Products |  What's New  |  Sales  |  Tech Support |  Downloads  |  Employment  |  Company  |  Contact Us
INNOVENTIONS® Inc. "INNOVATIVE PRODUCTS FROM INVENTIVE MINDS"  
©1995, 2012 INNOVENTIONS, INC.  All rights reserved.